B-17 surface panels S.A.

1/3 72 537 B-17 surface panels S.A. 1/72 scale detail set for REVELL kit sada detailù pro model 1/72 REVELL eduard 72 537 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 16 23 26 4pcs 22 25 34 16 28 28 31 7 9 28

2/3 72 537 1 2pcs 4 5 20 21 8 27 8 12 2 3 8 27 11 14 30 32 33 29 19 10 15 6 4pcs 17 18 17 EDUARD M.A. 2012 Made in Czech Republic www.eduard.com

3/3 72 537 PARTS WITH GLUE DÍLY OPATØENÉ LEPIDLEM 1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames. 1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru. 3. Do not touch the adhesive areas of the etched components. 3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo. 4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo. 2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu. 5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted. 5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.

1/4 72 546 B-17F bomb bay 1/72 scale detail set for Revell kit sada detailù pro model 1/72 Revell eduard 72 546 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 2 = 0,5mm l = 0,5mm 30 Kit part 3 A? 2 38 C A 2 pcs 7 37 38 57 49 B 33 29 50 Kit part 1 26 57 29 2 pcs 36 28 = 0,5mm l = 0,5mm 2 pcs 56 27 4 30 A 2 pcs 36

2/4 72 546 D 66 63 64 65 55 1 23 E 31 52 43 43 46 25 51 35 48 43 43 25 45 62 47 F 2 sets 16 15 G 2 sets 14 58 12 16 15 17 14 18 12 9 12 pcs 10 58 10 9 8 pcs.

3/4 72 546 22 8 22 3 41 D Kit part 6 G Kit part 1 C 42 11 32 44 Kit part 2 E F Kit part 5 67 39 34 Kit part 5 F 69 32 68 40 40 34 A Kit part 3 32 D Kit part 12

4/4 72 546 Kit part Fill Kit part 92 53 Fuselage 54 61 60 Kit part 91 21 VELKÁ????? pcs 5 = 0,5mm l = 2mm 20 21 MALÁ????? pcs 59 6 = 0,5mm l = 2mm 20 19 EDUARD M.A. 2012 www.eduard.com Made in Czech Republic

1/4 B-17F interior S.A. 1/72 scale detail set for Revell kit sada detailù pro model 1/72 Revell 73 460 eduard 73 460 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 2 sets 66 65 6 34 76 67 27 77 35 71 75 56 2 pcs 17 Kit part 1 32 2 pcs 26 23 68 HOW TO MAKE THE RELIEF ON OPPOSITE - REVERSE - OF THE PLATE ball pen! 79 78 Kit part 16 Kit part 19 64 63 55 58 29 70 72 Kit part 17

2/4 73 460 18a 3 = 0,8mm l = 3,9mm 2 pcs = 0,8mm l = 2,7mm 21 16 21 16 25 28, 28 4 pcs 7 Kit part 16 8 33b 7 30 31 22 5, 28 4 pcs 7 Kit part 22 9 74 10 11 Kit part 46 2 1 3 pcs 33 12 20 14 18b 15 2 sets 19 44 Kit part 20 4 Kit part 21 Kit part 67 79

3/4 73 460 73 80 36 43 48 52 3 pcs = 3mm l = 5mm Kit part 63 37 46 62 51 54 82 45 39 41 40 38 49 2 pcs = 3mm l = 5mm Kit part 69 36 73 43 82 61 42 45 50, 59 3 pcs = 3mm l = 5mm 54 51 40 47 59 48 41 80 53 50 4 pcs EDUARD M.A. 2012 www.eduard.com Made in Czech Republic

4/4 73 460 Kit part 172 2 pcs 57 60 Kit part 171 41 81 PARTS WITH GLUE. DÍLY OPATØENÉ LEPIDLEM 1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames. 1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru. 3. Do not touch the adhesive areas of the etched components. 3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo. 4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo. 2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu. 5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted. 5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat. EDUARD M.A. 2012 www.eduard.com Made in Czech Republic

1/4 73 461 B-17F front interior 1/72 scale detail set for REVELL kit sada detailù pro model 1/72 REVELL eduard 73 461 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 48 45 0,5x0,8mm 31 0,5x0,8mm? 0,5x0,8mm pen 48 fill 2 sets 37 6 sets 42 47 38 ( 59 ) 52 46 90 0,5x2,0mm 30 ( 60 )

2/4 73 461 29 4pcs 9 23 34 VOLT 17 1 27 7 40 4 44 55 53 15 3 35 2 23 63 15 VOLT 63 2 56 1 36 4 33 55 28 63 6 3 49

3/4 73 461 29 4pcs 20 34 12 19 38 11 5 23 55 3 16 4 21 38 47 25 28 step # 2 39 step #1 26 43 18 41 32 14 22 8 63 CAUTION 10 46

4/4 73 461 50, 51 C 50 50, 51 51 A 50, 51 23 B 50, 51 63 B 54 50, 51 50, 51 B A 23 63 50, 51 50, 51 50, 51 54 B A 50, 51 C EDUARD M.A. 2012 Made in Czech Republic www.eduard.com

1/4 73 462 B-17F rear interior 1/72 scale detail set for REVELL kit sada detailù pro model 1/72 REVELL eduard 73 462 film APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 20 20 71 57 0,5x0,7mm 0,5x0,7mm 0,5x0,7mm 21 film B 21 61 21 58 59 71 79 0,5x0,7mm 0,5x0,7mm 71 3 86 38 76 HOW TO MAKE THE RELIEF ON OPPOSITE - REVERSE - OF THE PLATE 2 ball pen 86 18 40 5sets 39 1 1 7 2 25 41 2pcs 18 10pcs 78 18

2/4 73 462 0,5x0,7mm 68 22 3 71 54 72 1,0x8,07mm 51 88 22 23 14 52 10 11 29 9 63 60 69, 77 83 8 62 12 73 84 47, 58, 59 3 69, 77 69 32 77 12, 63 64 81 49 10, 11, 14, 23 9, 29, 60 22 8, 62

3/4 73 462 37 4 36 34 35 26 16 26 15 85 29 63 87 9 88 43 40 75 65 89 0,5x1,0mm 44 27 28 53 30 1,0x2,0mm 14 90 80 11 10 67 34 8 62 63 67 31 74 70 164, 166 29 90 2pcs 60 5pcs 19 9 50 162? 88 164, 166 6 5 161 167 11

4/4 73 462 56 55 55 56 66 38 45 46 39 73 84 47, 58, 59 45 47 48 32, 42 17 36 37 film A 41 82 32, 42 35 33 EDUARD M.A. 2012 Made in Czech Republic www.eduard.com

1/2 eduard CX 333 70 B-17F 1/72 71 CX 333 The die-cut mask for accurate canopy frame painting of the Revell scale 1/72 KIT 120 2x 2x 120 176 79 80 180 LIQUID MASK 87

2/2 CX 333 175 175 15 67 43 44 74 75 064 167 167 167 14 1 1 62 66 EDUARD M.A. 2012 Made in Czech Republic www.eduard.com

1/2 72 545 B-17F landing flaps 1/72 scale detail set for Revell kits sada detailù pro modely 1/72 Revell eduard 72 545 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 0,6mm Kit part 0 Kit part 121 Kit part 112 Kit part 98 6 References : Aero Detail No.19 - Boeing B-17G Squadron/Signal No.5516 - Walk Around B-17 War Bird Tech Series Vol.7 - Boeing B-17 7 2 2 Right wing Left wing Right wing Left wing

2/2 72 545 I. 1, 10, 11 5, 10, 11 1 5 III. = 0,8mm l = 10,1mm II. 1 V. 10 1 5 IV. 11 10 11 8 9 8 1, 8, 10, 11 5, 9, 10, 11 5 pcs = 0,4mm l = 3mm 1 Step 1 5 pcs = 0,5mm l = 2,5mm 7 4 Step 2 Right wing 4 3 EDUARD M.A. 2012 www.eduard.com Made in Czech Republic

1/3 72 544 B-17F exterior 1/72 scale detail set for REVELL kit sada detailù pro model 1/72 REVELL eduard 72 544 APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT GRIND OBROUSIT DRILL HOLE VRTAT OTVOR? BEND OHNOUT OPTION VOLBA REPLACE NAHRADIT ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PARTS LEPTANÉ DÍLY PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ FILL TMELIT 45 46 46 45 57 58 26 27 35 36 31 29 122 99 56 37 38 111 20 21 6 4sets 0 121 112 98 61 70, 71 40 39 59? 60 85 52 53 30 0 121? 86 87

2/3 72 544 33 34 54 65 47 65 65 10 51 55 19 18 65 17 16 Right wing Left wing 15 14 145, 146, 147, 149, 151, 152 12 145, 146, 147, 148, 151, 152 48 4 2 48 4 sets 23 22 3 50 33 32 116 2 67 66 107, 108, 128 9 4 sets 4 sets Kit parts 159, 160 28 5 8 8 28 5 Kit part 154 1

3/3 72 544 41 42 67 175 93 68 7 63 43 64 90 wire 62 25 32 62 176, 180 141, 142, 143, 144 63 right wing 121, 0 For futher detail sets look for eduard 73462 B-17F rear interior (not included in this set) 11 63 44 For futher detail sets look for eduard 73461 B-17F front interior (not included in this set) 49 49 EDUARD M.A. 2012 Made in Czech Republic www.eduard.com