CENÍK Ředitelský nábytek JoyLine Classic Taylor Made (k cenám se připočítává 21 % DPH) platný od 3.6.2015 Dodací lhůty a podmínky: * 4-5 týdnů po objednání * zabezpečujeme dopravu na místo určení na náklady zákazníka * při zakázce nad 40.000,-Kč doprava na náklady firmy SOLOFORM Platební podmínky * záloha ve výši 50% ceny při objednání * doplatek v hotovosti při převzetí zboží * doplatek na základě proforma faktury SOLOFORM s.r.o., Na Kopánku 163, 251 63 Kunice Telefon: 323 664 459, Fax: 323 664 460 Mobil: 777 759 380 e-mail:soloform@soloform.cz, www.soloform.cz DIČ:CZ45311447
Ředitelský nábytek Structure: made up of steel structural elements in the four-leg configuration or full sides and melamine modesty panel for the panel configuration. The four-leg configuration includes steel structural elements, each leg is made up of an elliptic-section tubular vertical element of 40x80 mm (thickness 20/10), welded on top to a square plate of thickness 40/10 mm forming a 45 angle diagonally (length 32 cm); in the part in contact with the floor, the tubular plate has three holes for attaching it to the floor by means of bushes. In the contact point with the floor, the tubular piece ends with a 40/10 plate shaped according to the tube profile, equipped with a threaded insertion where a plastic levelling foot is located, in order to make it possible to find the most precise levelling even on uneven surfaces. It can be supplied with an optional cable tray made of steel plate of thickness 9/10, made up of two telescopic pieces with length adjustable from 110 to 150 cm; it is equipped with holes used to attach it to the floor by means of bushes. The configuration with full sides is made up of two melamine panel legs of thickness 40 mm, each one of which equipped with two square plates on top, of thickness 40/10 mm, forming a 45 angle diagonally (length 32 cm), and a round element bound to the side itself; the point in contact with the floor is equipped with holes used to attach it to the floor by means of bushes. At the point in contact with the floor, there are two levelling feet. The melamine modesty panel is attached to the sides by means of kegs and tie rods. Each metal component can be painted white, anthracite, silver, yellow RAL 1012, red RAL 3016, blue RAL 5024 and green RAL 6025. Tops: They are made of poplar chipboard panels of thickness 40 mm with low emission of formaldehyde and fire reaction class 2 according to the regulations currently in force, enriched by means of melamine resins of thickness 40 mm and ABS edges. The melamine finishes available are white, grey, pear, light oak, walnut, dark oak colour, Manhattan cherry and white-veined. Modesty panel: the four-leg version includes a melamine panel of thickness with metal brackets attached under the desk board. Pedestal and service unit: fully made of melamine of thickness 18 mm, all components are connected with each other. Pedestal can have two or three drawers which slide on simple extractable tracks, equipped with nylon coated metal ball bearings. Each drawer is equipped with a silver plastic bow-shaped handle. It is equipped with four spinning wheels of Ř50 at its base. The pedestal is equipped with a Yale type locker for simultaneously locking all the drawers and with a double foldable key for anti-accident purposes. The service unit can include two or three combinable elements, namely a chest of two or three drawers, a PC holding module and a module with a door on the right or on the left; these elements compose the service unit, completed by a unique top or back placed on fixed feet of height 8 cm or on wheels of Ř60. The elements mentioned above can compose an additional element to the desk by means of the extension board. All the pedestal and the elements of the service unit are equipped with a lock with a double foldable key. The series is equipped with extensions with panel leg, on legs or with bearing elements (service unit elements), square meeting tables (board thickness 28 mm) 120x120 cm and 160x160cm, round ones of diameter 80, 100 and 120, low tables of height 45 cm (board thickness 40 mm) and high one of height 105 cm (board thickness 40 mm SOLOFORM spol. s.r.o. / www.soloform.cz / 2/6 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kovové konstrukce stolů V01 Bílá V05 Antracit V73 Stříbrná V75 Žlutá -1012 RAL V76 Červená-3016 RAL V77 Modrá-5024 RAL V78 Zelená -6025 RAL Nosník pod stolem je vždy ve stříbrné barvě V73 Vrchní desky stolů T01 Bílá T02 Šedá T40 Ořech T42 Dub tmavý T45 Třešeň Manhattan T48 Bílá žilkovaná SOLOFORM spol. s.r.o. / www.soloform.cz / 3/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kód JL013V JL014V JL015V Ředitelský stůl Ředitelský stůl Ředitelský stůl 160 x 90 x 75 180 x 90 x 75 200 x 90 x 75 Cena bez DPH 10.478,- 10.698,- 10.918,- Kód JL019V JL020V JL021V Rozšiřovací díl 80 x 60 x75 Rozšiřovací díl 100 x 60 x 75 Rozšiřovací díl 120 x 60 x 75 Cena bez DPH 5.610,- 5.885,- 6.325,- Kód JL025V JL026V JL027V Š x V Krycí deska spodní Krycí deska spodní Krycí deska spodní 160 x 35 180 x 35 200 x 35 Cena bez DPH 2.530,- 2.668,- 2.750,- SOLOFORM spol. s.r.o. / www.soloform.cz / 4/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kód JL016V JL017V JL018V Ředitelský stůl Ředitelský stůl Ředitelský stůl 160 x 90 x 75 180 x 90 x 75 200 x 90 x 75 Cena bez DPH 13.613,- 13.970,- 14.273,- Kód JL022V JL023V JL024V Rozšiřovací díl Rozšiřovací díl Rozšiřovací díl 80 x 60 x75 100 x 60 x75 120 x 60 x75 Cena bez DPH 6.793,- 7.068,- 7.508,- SOLOFORM spol. s.r.o. / www.soloform.cz / 5/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kód Cena bez DPH 160 x 170 x 75 JL028V " Pravý " 21.973,- 180 x 170 x 75 JL029V " Pravý " 22.330,- 200 x 170 x 75 JL030V " Pravý " 22.633,- 160 x 170 x 75 JL031V " Levý " 21.973,- 180 x 170 x 75 JL032V " Levý " 22.330,- 200 x 170 x 75 JL033V " Levý " 22.633,- 160 x 190 x 75 JL034V " Pravý " 22.413,- 180 x 190 x 75 JL035V " Pravý " 22.770,- 200 x 190 x 75 JL036V " Pravý " 23.073,- Ředitelský stůl "na obrázku pravý" 160 x 190 x 75 JL037V " Levý " 22.413,- 180 x 190 x 75 JL038V " Levý " 22.770,- 200 x 190 x 75 JL039V " Levý " 23.073,- 160 x 210 x 75 JL040V " Pravý " 23.018,- 180 x 210 x 75 JL041V " Pravý " 23.375,- 200 x 210 x 75 JL042V " Pravý " 23.678,- 160 x 210 x 75 JL043V " Levý " 23.018,- 180 x 210 x 75 JL044V " Levý " 23.375,- 200 x 210 x 75 JL045V " Levý " 23.678,- SOLOFORM spol. s.r.o. / www.soloform.cz / 6/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kód JL013C JL014C AT007A Kontejner 3C 42 x 59 x 57 Kontejner 2C 42 x 59 x 57 Plastová přihrádka na psací potřeby 34 x 16,5 x 1,5 Cena bez DPH 5.280,- 5.198,- 193,- Kód JL049V JL050V Pozn.: tloušťka melaminu 28 mm čtvercový 120 x 120 x 75 čtvercový 160 x 160 x 75 Cena bez DPH 10.835,- 13.723,- Kód JL046V JL047V JL048V Pozn.:tloušťka melaminu 40 mm 80 x 75 100 x 75 120 x 75 Cena bez DPH 6.985,- 8.058,- 8.580,- Kód JL051V JL052V Pozn.:tloušťka melaminu 40 mm 60 x 60 x 45 60 x 60 x 105 Cena bez DPH 6.270,- 7.095,- SOLOFORM spol. s.r.o. / www.soloform.cz / 7/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015
Kód Cena bez DPH 42 x 56 x 50 JL075V " 3C " 4.098,- 42 x 56 x 50 JL076V " 2C " 3.988,- 42 x 56 x 50 JL077V " PC střed! " 3.795,- 42 x 56 x 50 JL078V " Sk. Pravá " 3.905,- Modulové skříně " Sk. na obrázku pravé " 42 x 56 x 50 JL079V " Sk. Levá " 3.905,- Kód JL080V JL081V JL045C JL046C Š / V pro 2 moduly Vrchní a zadní zakončení Š 84 pro 3 moduly Vrchní a zadní zakončení Š 126 sada noh pro moduly V 8 sada koleček pro moduly V 6 Cena bez DPH 2.118,- 2.585,- 1.045,- 550,- Kód Cena bez DPH úložný prostor pod rozšiřovací desku, včetně sady 4 noh 42 x 56 x 13 JL047V 2.640,- Pozn.: Pro tuto sestavu nutno objednat typ modulové skříně!!! 80 x 60 x 75 JL013A 2.173,- a tři velikosti rozšiřovacích desek 100 x 60 x 75 JL014A 2.448,- 120 x 60 x 75 JL015A 2.888,- SOLOFORM spol. s.r.o. / www.soloform.cz / 8/9 / soloform@soloform.cz / mob.: +420 777 759 382 / Ceník 2015