Invite you to the 5 th International Conference

Transkript

1 FACULTY OF MECHANICAL ENGINEERING, JANA EVANGELISTA PURKYNĚ UNIVERSITY IN ÚSTÍ NAD LABEM, CZ OLYMPUS CZECH GROUP, S.R.O., THE MEMBER OF CONCERN DEPARTMENT OF METALS AND CORROSION ENGINEERING, INSTITUTE OF CHEMICAL TECHNOLOGY IN PRAGUE, CZ UNIVERSITY OF WEST BOHEMIA FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF MATERIAL SCIENCE AND TECHNOLOGY, FACULTY OF MECHANICAL ENGINEERING, TECHNICAL UNIVERSITY IN LIBEREC, CZ A OTHER WORKPLACE MANUFACTURING TECHNOLOGY AND MATERIALS ENGINEERING UNIVERSITIES AND INDUSTRY Invite you to the 5 th International Conference MICROSCOPY AND NON-DESTRUCTIVE MATERIAL TESTING Hotel Harmonie Luhačovice II. Circular Letter

2 Venue of the conference The conference venue is the Hotel Harmony I, which offers accommodation in beautiful countryside on the outskirts of the spa Luhačovice. Hotel Harmonie I Jurkovičova alej 857 Luhačovice recepce@hotelharmonie.cz phone: Objectives of the conference MICROSCOPY AND NON-DESTRUCTIVE MATERIAL TESTING 2018 The conference is focused on the use of optical, laser and electron microscopy for materials research, optimization of material properties and analysis of relationships with production technologies. Conference approaches use these methods to solve production and technological problems and new trends and opportunities in these areas. In addition, the conference will deal with using non-destructive testing in the production process for testing and inspection of materials and the research approach and the possibility of using special techniques in practice and research (thermal imager, highspeed camera, x-ray equipment, ultrasound equipment and lines, etc.). The conference will be introduced to a variety of devices and equipment which can become familiar with their use, function, operation, etc. The main goals and focus of the conference MICROSCOPY AND NON-DESTRUCTIVE MATERIAL TESTING 2018 is to give a comprehensive overview of the current situation in these areas: use of microscopy, X-ray methods and non-destructive methods of research and solving technological problems, electron microscopy and its applications in science, research and optimization of material properties and manufacturing processes, optical and laser microscopy and their applications (science, research, applications, optimization of manufacturing processes), new trends and equipment in the field of microscopy, fractography and its use as a forensic science, use of X-ray methods in solving technological and design problems, non-destructive testing (devices, applications in science, research and industry). The Scientific Committee of the Conference prof. Ing. Ivan Lukáč, PhD. Faculty of Metallurgy, Technical University in Košice, SK prof. Ing. Jan Mádl, CSc. Czech Technical University in Prague, Praha, CZ prof. Dr. Ing. Dalibor Vojtěch Department of Metallic Materials and Corrosion Engineering, VŠCHT, Praha, CZ prof.ing. Dana Bolibruchová, PhD. Faculty of Mechanical Engineering of Žilina University, University of Žilina in Žilina, SK prof. Stanislaw Legutko, D.Sc. Faculty of Mechanical Engineering and Management, University of Poznan, PL prof. Ing. Iva Nová, Ph.D. Faculty of Mechanical Engineering, Technical University in Liberec, CZ prof. Dr. Ing. Antonín Kříž Department of Material Science and Technology, FS ZČU, CZ prof. Ing. Štefan Michna, PhD. Department Technology and Materials, FMI UJEP, Ústí nad Labem, CZ doc.ing. Nataša Náprstková, Ph.D. Department Technology and Materials, FMI UJEP, Ústí nad Labem, CZ doc. Ing. Dana Stančeková, PhD. Department of Machining and Manufacturing Technology, University of Zilina doc. Ing. Daniela Kalincová, PhD. Faculty of Environmental and Manufacturing Technology, Technical University in Zvolen, SK doc. Ing. Jarmila Trpčevská, PhD. Faculty of Metallurgy, Technical University in Košice, SK prof. Ing. Miroslav Müller, Ph.D. Faculty of Technology, Czech University of Agriculture in Prague, CZ Ing. Anna Rudawska Ph.D., D.Sc. Lublin University of Technology, PL Ing. Jerzy Józwik Ph.D., D.Sc. Lublin University of Technology, PL Ing. Alena Němečková OLYMPUS CZECH GROUP, S.R.O., THE MEMBER OF CONCERN

3 Accompanying events exhibition and presentation of companies competition "The best material structure photography" Visiting the Vizovice Chateau with a tour of the cellars and crypts excursion to the Destillery Land Rudolf Jelinek Vizovice with a tastingcompetition for the best Ph.D. presentation Conference language and publication Jednacími jazyky konference jsou čeština, slovenština, polština, angličtina. Příspěvky je nutno dodat v jazyce českém nebo slovenském pro uveřejnění v recenzovaném časopise Strojírenská technologie anebo jazyce anglickém (GB English) pro uveřejnění v časopise Manufacturing Technology, který je zařazen ve světové citační databázi SCOPUS. Obligatory application and submission of contributions Annotation of papers of up to 100 words with a binding application must be sent in electronic form to the conference secretariat (jaroslava.svobodova@ujep.cz) no later than 30 August Participation Fee Participation Fee: 150 EUR per person without VAT. Participation fee includes: Conference fee, room rental, technical equipment, refreshments, social events etc. Publication fee is not included in the participation fee. Form of payment only by invoice. Accommodation is paid by each participant individually and it is done after arrival at the point of the conference. The Organizing Committee will only provide accommodation reservation. The Organization Committee of the Conference prof. Ing. Štefan Michna, PhD., doc. Ing. Nataša Náprstková, Ph.D., doc. Ing. Martin Novák, Ph.D., Ing. Jaroslava Svobodová, Ph.D. Ing. Alena Michalcová, Ph.D., Department of Metallic Materials and Corrosion Engineering, VŠCHT, Praha, CZ Ing. Iva Nováková, Ph.D., Faculty of Mechanical Engineering, Technical University in Liberec, CZ Ing. Jan Novotný, Ph.D., doc. Ing. Josef Soukup, CSc. Department Technology and Materials, FMI UJEP, Ústí nad Labem, CZ Ing. Blanka Skočilasová, Ph.D., Ing. Irena Lysoňková, FSI, UJEP, Ústí nad Labem, ČR Ing. Pavel Kraus, Mgr. Iryna Hren, Ing. Karel Šramhauser, Ing. Lenka Michnová,

4 Framework Program Detailed timetable for the conference with precise timing arrangement of individual contributions and the lectures will be distributed in III. Circular Letter to Lunch 13:00 14:00 Registration of conference participants 12:00 16:00 Coffee Break 16:00 16:30 1 st block of the conference - doctoral section 14:00 18:30 Dinner 19:00 20: Registration of conference participants 08:00 10:00 Opening of the expert part of the conference 08:30 08:45 2 nd Conference Block - Conference Meeting 08:45 11:00 Coffee Break 11:00 11:30 3 rd Conference Block - Conference Meeting 11:30 13:30 Lunch 13:30 14:30 Outgoing 14:30 Tour of the Vizovice Chateau, tour of the cellars 15:00 16:30 and crypts, Chateau chocolate factory Vizovice Excursion to the Destillery Land Rudolf Jelínek 17:30 19:00 Vizovice with a tasting Dinner 19: th Conference Block - Conference Meeting 08:30 10:00 Coffee Break 10:00 10:30 5 th Conference Block - Conference Meeting 10:30 12:30 Lunch 12:30 13:30 6 th Conference Block - Conference Meeting 13:30 15:30 Coffee Break 15:30 16:00 7 th Conference Block - Conference Meeting 16:00 17:30 Closing of the konference 17:30 17:40 Discussion of editorial board of journals MT a ST 16:00 17:00 Social evening 19:00 During the first and second day will also run a competition for "The most beautiful material structure picture"

5 The "Best Picture of the Material Structure" Competition Competition will be held in two categories namely in the field of colour photography and in the field of black and white photography. Each participant may submit max. 3 colour and 3 black and white photographs of material structure (it is possible to participate in only one of these categories). Photos can be in size max. A4. Each photograph is then needed to describe: zoom, 1-2 sentence description of the structure, method of etching and observation. Photos will be posted during the first day of the conference and will be evaluated by the Competition Commission and the participants (Vox Populi). The winners will be awarded with prizes. Awards will be presented at the social evening of the conference. Photo images should be sent no later than to the contact address. It is also possible to bring the photo in advance, by prior arrangement and sending the necessary information in advance, by , to the conference venue. The photo must be handed over on the first day of the conference no later than the next morning to be posted and can be judged fairly. Important dates till Sending an obligatory application and abstract till till till Sending of the II. Circular Letter Deadline for sending articles - the full text of the article and advertisement in the journal Registration fee (charge for advertising and conference separate space) till till Sending III. Circular Letter - the final conference program Sending photos (max. 6 units in total) in the contest "Best picture material structure" Conference venue Contact Ing. Jaroslava Svobodová, Ph.D. jaroslava.svobodova@ujep.cz tel.: DTM FME UJEP Pasteurova 3334/ Ústí nad Labem, Czech Republic

6 Conference venue and accommodation Hotel Harmonie I Luhačovice Accommodation will be booked on the basis of binding application and requirements at the venue of the conference. Conference participants will be staying at the Harmonie I Hotel. Accommodation will be paid by each participant on site at the hotel reception. More information about Harmonie I Accommodation prices: Hotel Harmonie I Single or double occupied by one person 850 CZK / pers. night including breakfast Accommodation in a 2-bed room per person 650 CZK / pers. night including breakfast

7 Preliminary summary of lectures Matúš Bajcura Constellium Extrusions Děčín s.r.o. Analýza intermetalických fází v lité struktuře slitiny AA 6050 Lucia Bajtošová Univerzita Karlova Mikrostruktura AlMgScZr slitiny po intenzivní plastické deformaci omezeným lisováním drážkovanou matricí Juraj Belan The High-Temperature Loading Influence on Orthorhombic Ni3Nb DOa δ - Phase Formation and its Affect on Fatigue Lifetime in Alloy 718 Petr Beneš Západočeská univerzita v Plzni Možnosti využití NDT pro kontrolu tepelného zpracování Dana Bolibruchová Radek Borusík Bricín David Petra Bublíková Constellium Extrusions Děčín s.r.o. Západočeská univerzita v Plzni Centrum výzkumu Řež s.r.o. Zliatiny typu Al-Si legované Mo a Zr Využití laboratorních metod pro zjišťování výkonnosti produktů na zjemňování zrna a její aplikace ve výrobním procesu polokontinualně odlévaných odlitků Al slitin pro tváření Use of Electron Microscopy for Analysis of WC-Co Powder Mixtures Before and after their Processing by SLM Technology Neutron Irradiated Reactor Internals: An Applied Methodology for Specimen Preparation and Post Irradiation Examination by Electron Microscopy Methods Miroslav Cieslar Univerzita Karlova Rezistometrie a hliníkové slitiny Jaroslav Čapek Fyzikální ústav AV ČR Studium metastabilního eutektika Zn-MgZn2 ve slitinách ZnMg0,8Ca/Sr0,2 Drahomír Dvorský Hořčíkový kompozitní materiál se spojitou výztuží MgF2 připravený práškovou metalurgií Michaela Fousová. Corrosion of 3D-printed AlSi9Cu3Fe Alloy Gürkan Gürdil Ondokuz Mayis University Effect of Particle Size on Surface Smoothness of Bio- Briquettes Produced from Agricultural Residues Iryna Hren Univerzita J. E. Purkyně v Ústí nad Labem Fractographic Analysis of Strontium - Modified Al-Si Alloys

8 Martina Hřibová Univerzita Tomáše Bati ve Zlíně Vliv mikrovlného pole na fázovou transformaci II - I isotaktického polybutenu -1 Štěpán Ježek ČVUT Comparison of Ultrasonic and X-ray Testing of Butt Weld Karel Jiříkovský Olympus Czech Group, s.r.o., člen koncernu Nové možnosti měření v 3D mikroskopii Zdeněk Kačenka Vliv tepelného zpracování na vlastnosti slitiny NiTi46 Daniela Kalincová o Zvolene Quality Evaluation of the Coating and Influence on the Chopping Tool Lifetime Pavel Kejzlar The Study of the Effect of Mechanical and Heat Treatment on the Crystal Texture of Cold Drawn Seamless Tubes Vojtěch Keller The Effect of Chromium Addition and Heat Treatment on Phase Composition of Cast Fealsi Alloys Anna Knaislová Mikrostruktura slitiny TiAl15Si15 připravené práškovou metalurgií Zdeňka Kolská Univerzita J. E. Purkyně v Ústí nad Labem Neexperimentální (a tedy nedestruktivní) metody stanovení fyzikálně-chemických vlastností látek David Koreček Determination the Influence of Load-rate on Strain and Spring-back Magnitude for Titanium Alloy by means of Numerical Simulation Rostislav Králík Univerzita Karlova Studium tepelné stability hliníkových slitin pomocí insitu elektronové mikroskopie Patrícia Krištofová Vlastnosti hořčíkové slitiny WE43 vyrobené metodou 3D tisku Vojtěch Kučera Fázové složení a mikrostruktura za tepla tvářené oceli se zinkovým povlakem připravené metodou přímého lisování Lenka Kuchariková Effect of Iron Content on the Formation of Al5FeSi and Porosity in Al Si-Mg Hypoeutectic Cast Alloys

9 Petr Louda Evaluation of Mechanical Properties of Composite Geopolymer Blocks Reinforced with Basalt Fibres Milan Luňák Beneš a Lát a.s. Problematika modifikace siluminů, nejen konvenčními činidly Irena Lysoňková Univerzita J. E. Purkyně v Ústí nad Labem Vliv tepelného zatěžování na kompozitní povlak na bázi PTFE Marek Matějka Analýza zmien mikroštruktúry zliatiny AlSi9Cu3 spôsobené viacnásobným pretavovaním Anna Mičietová Alena Michalcová Influence of Surface Integrity after Turning on the Consecutive Plasma Nitridation and Barkhausen Noise Emission Vliv předúprav rychle ztuhlých pásků na strukturu kompaktních slitin AlFeMn připravených práškovoou metalurgií Vojtěch Miller Mechanical Resistance of Hydrophobic Inorganic- Organic Nanolayers with Antifouling Effect Miroslav Müller Česká zemědělská univerzita Research on Application of Technology Using Water Jet on Machining of Polymeric Composite Biological- Reinforced Materials Miroslav Neslušan Influence of Tool Wear on Surface State after Turning Stainless Steels Kateřina Nová Legování slitin Fe-Al-Si niklem a titanem Vladivoj Očenášek Kateřina Opatová SVÚM a.s Západočeská univerzita v Plzni Application of Electric Conductivity Measurements in Material Research and Solution of Technological Problems Influence of Bainite Fraction on Improving Mechanical Properties of Quenched and Tem-pered High Silicon Steel Jan Patera Centrum výzkumu Řež s.r.o. Korelace degradace betonu a nelineární ultrazvukové odezvy Herbert Pavlíček Carl Zeiss spol. s r.o. Correlative Workflows with X-rays, Electron and Ion Beams

10 Milan Petřík Olympus Czech Group, s.r.o., člen koncernu NDT kontrola lepených spojů Vojtěch Průcha Západočeská univerzita v Plzni Analýza poškozeného svařence z Hadfieldovy oceli Ivan Skalický Constellium Extrusions Děčín s.r.o. Vliv míchání taveniny při lití Al čepů na strukturu materiálu Jaroslava Svobodová Univerzita J. E. Purkyně v Ústí nad Labem Degradační struktury ocelí aplikované v energetice Jan Šerák Mikrostruktura a vlastnosti oběžných mincí První Československé republiky (na oslavu 100. výročí založení Československa) Pavel Ševčík BAS Rudice spol. s r.o. Nové trendy ve spektrometrii Andrea Školáková Popis vzniku fází v systému Ni-Al Václav Švorčík Periodické struktury na polymeru pro senzory Jarmila Trpčevská Košiciach Hodnotenie mikroštruktúry tvrdého zinku vznikajúceho pri žiarovom zinkovaní Miroslava Ťavodová o Zvolene Use of Weld Overlaying Technology to Restore Functional Surfaces of Chopping Knives Jana Veselá Centrum výzkumu Řež s.r.o. Destruktivní a nedestruktivní hodnocení tloušťky oxidických vrstev trubek přehříváků Dalibor Vojtěch Mikrostruktura pokročilých nástrojových ocelí vyrobených práškovou metalurgií Lukáš Zuzánek Hydrogen Brittleness Analysis by X-ray Diffraction

11